Powered Access Hire - Boss X3 Youngmans Push Around Scissor Lifts

you are here: Powered Access Hire / Youngmans Push Around Scissor Lifts lifts / Boss X3

Full Member of
International Powered
Access Federation.

IPAF trained staff.

Equipment regularly
tested for health and
safety compliance.

Test certificates supplied with all equipment.

Advice given on required safety equipment.

Competitive pricing and reduced rates for long term hire.

Helpful and knowledgeable staff.

Free site surveys.

Delivery throughout London and the home counties.

Youngmans Boss X3 Push Around Scissor Lift The BoSS X3 is the new tough, professional, manually propelled micro powered access platform from the Youngman Group. Designed for a multitude of tasks including general maintenance, cleaning, painting, and fit and strip out work it can be used on construction projects, in factories, in transport environments, shopping centres, retail outlets and in offices. Perfect low level powered access.

Please Note: Under the Provision and Use of Work Equipment Regulations Act 1998, anyone using this equipment must be trained and accredited. For further information about Mr Plant Hire's 1 day Powered Access Training Courses click here.

Youngmans Boss X3 Push Around Scissor Lift Working height 4.55m - Platform height 2.55m Tilt sensor as standard; no stabilisers required Locking brakes on all 4 castors Rigid and robust box scissors with fully bushed joints Safety cut out on descent at 1.85m Audible alarm on descent Spring loaded self closing gate with positive locking latch Gate incorporates end toeboard removing trip hazard Safety and usage instructions mounted on guardrail Platform mounted handset control with emergency stop Secondary emergency stop button mounted on base Slip resistant deck Fail-safe props for deployment during maintenance Platform overload and pressure loss valves as standard Emergency platform lowering mechanism Heavy duty powerpack; 12 second ascent Over 350 lifts and descents per charge Fits through standard doorways and into passenger lifts Serviceable components in slide out compartment Pull out storage drawer for cables and tools Wide forklift entry and transit strap points Smooth roll castors with non marking tyres Anti static earthing strip Towing hook Heavy duty all weather protective cover

`Youngmans Boss X3 Push Around Scissor Lift`
Lift type: Pop-Up	Maximum platform height 2.55 metres
Maximum working height: 4.55 metres	Platform length: 1.05 metres	Platform width: 0.57 metres
Platform guardrail height: 1.1 metres	Toe board height: 0.15 metres	Overall width: 0.7 metres
Stowed height: 1.8 metres (0.85m with guardrails removed)	Stowed length: 1.23 metres (with all 4 brakes applied)	Ground clearance: 0.05 metres
Voltage: 12 volt DC	Motor: 1.2 kW DC	Battery: 12v/100Ah
Battery charger: Automatic multi-voltage 110 and 240v	Hydraulic pressure: 250 bar	Hydraulic fluid reservoir: 2 litres
Maximum number of lifts and descents on one charge: >350 (80kg)/>200(240kg)	Ascent time: 12 seconds (80kg) - 16 seconds (240kg)	Descent time: 13 seconds (80kg) - 16 seconds (240kg)